TECHNICAL RESOURCES · BECCENTRIC
Specify the drive.
Match the application.
A practical guide for motor, gearbox and control enquiries. Begin with the complete nameplate and the conditions in which the drive will operate.
AC electric motors
Read the full nameplate: kW, rated current, voltage connection, frequency, speed, duty and efficiency class. A 230/400 V delta/star motor and a 400/690 V delta/star motor require different connections on a 400 V supply. Frame size alone does not establish interchangeability; check shaft, key, flange, foot centres and terminal-box position.
- Power, voltage / connection, phase, frequency and rated current
- Rated rpm, frame, mounting and shaft / flange dimensions
- Load, starting method, operating hours and ambient conditions
Brake & special-duty motors
Special-duty selection starts with the application. Brake motors need coil voltage and braking duty; inverter operation needs a suitable torque-speed envelope and cooling. Servo motors need a compatible controller and feedback. Vibrator motors are selected by force and motion. Hazardous-area motors require the site classification and the exact approved motor-drive arrangement.
- Exact motor / controller references and required operating function
- Speed range, load, starts / stops and duty cycle
- Brake, feedback, cooling or hazardous-area documentation as applicable
Stainless & washdown drives
Specify the cleaning process, not just “washdown”. Include water temperature, pressure, chemicals, concentration and exposure time. Stainless construction does not by itself establish food-contact suitability or an ingress-protection rating. Confirm the selected enclosure, seals, cable entries, installation position and lubrication requirements for the actual cleaning regime.
- Cleaning pressure, temperature, chemicals and frequency
- Motor power or gearbox torque, speed and mounting
- Required IP rating, materials, seals and lubricant documentation
Helical & shaft-mounted gearboxes
Send motor input speed, the required output speed or ratio, and output torque or a clear description of the driven load. Include starting shocks, running hours and belt / chain loads on the output shaft. Foot, flange and torque-arm mounting are different interfaces. Confirm the operating position, lubrication and whether a backstop is required.
- Input speed / power, ratio, output rpm and output torque
- Solid / hollow shaft, bore, keyway and mounting drawing
- Load cycle, radial / axial loads and operating position
Right-angle gearboxes
Helical-bevel, worm and helical-worm units have different performance and mounting characteristics. Confirm ratio, output speed, continuous duty and thermal conditions. Do not assume a worm unit is self-locking or suitable as a holding brake. Shaft side, torque arm, flange pattern and mounting position are essential replacement details.
- Gearbox type, ratio, torque and continuous / intermittent duty
- Output shaft or bore, shaft side and flange / foot dimensions
- Installation position, cooling, lubrication and any holding requirement
Planetary & industrial gearboxes
A high nominal torque is not a complete selection. Provide peak and continuous torque, input / output speed, load spectrum, running hours and external shaft loads. Precision planetary applications also require backlash and stiffness information. Thermal capacity, cooling and lubrication must suit the installation; precision and heavy-duty planetary units are not interchangeable.
- Continuous / peak torque, ratio, speed and load cycle
- Input interface, output shaft / flange and external loads
- Backlash requirement, cooling, mounting and lubrication
VFDs, brakes & replacement matching
For a VFD, give both supply and motor data, rated current, load type, overload duty and required control interfaces. Do not select by kW alone or assume any drive accepts a single-phase input. For brakes, distinguish controller supply from brake-coil voltage and confirm the wiring and full component reference. An existing equipment photograph helps identify missing details.
- Complete references and clear nameplate / wiring photographs
- Electrical supply, motor current, control signals and duty
- Mechanical interfaces, accessories and whether alternatives may be reviewed
Useful speed checks
For a reduction gearbox, ratio ≈ motor input rpm ÷ required output rpm. At 50 Hz, synchronous speeds are 3,000 rpm (2 poles), 1,500 rpm (4 poles), 1,000 rpm (6 poles) and 750 rpm (8 poles). Use the actual motor nameplate rpm for a loaded induction motor.
These relationships help describe the requirement. Final sizing also needs torque, starting loads, service duty, mechanical interfaces, cooling and the exact operating limits.
Make the enquiry complete.
Include quantity, delivery location, required date and whether a proposed alternative is acceptable. Request certified drawings, performance data and application-specific documentation for the exact offered equipment.
